The appearance of PVC fiber reinforced hose is very beautiful and colorful. Users can choose different types and colors according to their needs.
At the same time, this type of hose is very clean, hygienic, and convenient to use, and is therefore widely used in the packaging of medical and cosmetic products.
In addition, the internal of PVC fiber reinforced hose basically excludes the oxygen in the air, so it can effectively prevent food from deteriorating when used for packaging.
The diameter of the hose is determined. PVC fiber reinforced hose is usually connected by neck clamps. The diameter of the hose must be determined before purchase. Generally, the caliber of PVC fiber reinforced hose represents the inner diameter of the hose or the outer diameter of the steel pipe.
Determine the type of hose, anti-static or conductive. According to the transported material, determine the required type of hose. Conductive hoses are mainly used for transporting materials that are prone to static electricity.
Determine the wall thickness of fiber reinforced hose according to pressure, etc. Generally, the thicker the wall thickness of the hose, the lower the bending radius and the better the wear resistance. Therefore, when selecting, it should be determined according to the wear resistance and pressure resistance of the transported material.
Usually, within the appropriate temperature and display range, it is necessary to protect PVC fiber reinforced hose better in this way.
Understand the assembly, select the size of the hose during the assembly process, and properly handle the form of the hose during installation and use.
Accept regular inspections. If abnormalities are found, they must be recorded truthfully.
PVC fiber reinforced hose is equipped with a high-strength fiber soft wire layer between the inner and outer walls of the plastic inner tube and outer tube. This PVC fiber reinforced hose is transparent, corrosion-resistant, beautiful in appearance, flexible, lightweight and durable.
PVC fiber reinforced hose can transport various gases, such as air and gas, as well as liquid and powder materials, within the range of -10℃-65℃.
With the development of modern industry, the demand for PVC fiber reinforced hose that can withstand high temperature and high pressure is also increasing. PVC fiber reinforced hose can be bent at will, which brings great convenience to the installation work and also plays a certain role in the safe operation of the pipeline system.
However, it is also necessary to pay attention to the fact that the installation stress of the hose is too high. In complex pipeline systems, due to restrictions on space and position conditions, it is difficult to install. The hose that is installed by compromising will inevitably produce local cold correction.
Based on the diameter of the pipeline and the specific situation on site, the range of cold correction varies from a few millimeters to several tens of millimeters, and some even reach several hundred millimeters.
The larger the amount, the greater the internal stress, and the residual installation stress is undoubtedly a huge hidden danger, which will cause fiber reinforced hose to break and affect safety.
When using PVC fiber reinforced hose, we should pay attention to checking the common sense of cleaning and maintenance, and check the hose that has been unused for a long time before use.
Pay attention to whether the external steel wire is corroded or worn; whether the joint is loose or leaking; whether the two ends of the hose show a non-passing appearance;
PVC fiber reinforced hose may be worn or damaged, such as the joint being corroded, worn or damaged by external forces. PVC fiber reinforced hose must be cleaned after use, before inspection, or before long-term storage.
