The basic processes of rubber pipe production include rubber mixing processing, cord and canvas processing, hose molding, vulcanization and so on. Rubber tubing with different structures and different skeletons have different skeleton layer processing methods and rubber tubing forming equipment.
Since the rubber tubing does not contain a skeleton layer, just use an extruder to extrude the rubber tubing. The rubber tubing needs to use a molding machine that wraps the rubber cloth on the inner rubber layer. When the rubber pipe is attracted, the metal spiral must be wrapped first. Knitting and winding hoses need to use special fabric knitting machines or winding machines. Knitting hoses need to use knitting machines and so on.
These rubber tubes are mostly rubber products, and they will age after a long time of use, especially the connection between the rubber pipe and the gas stove, which is generally fastened with iron wire, and it is prone to leakage and breakage after a long time of use, which brings certain hazards.
1. Use rubber hoses correctly
It is very important to determine the length of the rubber hose you need. At the same time, you should also check whether the usage conditions of the rubber hose meet the requirements of the selected hose. You should make sure that the rubber tubing you will use is the most suitable. The working pressure and suction value should be determined carefully.
In particular, it should be noted that sudden pressure changes or pressure peaks exceeding the allowable maximum value will greatly shorten the life of the rubber tubing. Both ends of the rubber tubing cannot be continuously immersed in the conveyed material.
2. Install the rubber hose for use
If you install the rubber pipe to make its bending radius smaller than the specified minimum value, the service life of the rubber pipe will be greatly shortened. Therefore, before installing the rubber pipe, it is recommended that you consult on the use information, especially the information on the bending radius of the rubber hose.
3. Maintenance of rubber hose
Cleaning: After use, it is recommended that you empty the rubber hose. If necessary, it should be cleaned.
Inspection: The rubber pipe must be inspected after each use to ensure that there is no structural damage.
Pressure: If the rubber pipe is under severe pressure or the outer layer of the rubber tubing will be in contact with the conveyed liquid for a long time, it is recommended to perform a hydraulic test.
We focus on manufacturing high quality quatliy pipes and pipe fittings. Our principle is committed to providing good raw materials with stable quality. We are willing to do business with customers forever. Our quality is widely recognized in the United States, Canada, the European Union, Japan, Southeast Asia and the Middle East. If you have any needs, please feel free to contact us.
