PVC fiber reinforced hose is an ideal pipe for water supply, gas and oil in general equipment such as industry, agriculture, fishery, construction and households. The inner and outer walls of the PVC fiber reinforced hose are uniform and smooth without air bubbles.
PVC fiber reinforced hose has the advantages of pressure resistance, tensile resistance, acid and alkali resistance, oil resistance, softness and lightness, good transparency, and no dead folds in bending.
PVC fiber reinforced hoses can partially replace metal pipes, rubber pipes and ordinary plastic hoses in oil, gas, and fluid transportation, and have important development and application value.
PVC fiber reinforced hoses are widely used in machinery, coal mines, petroleum, chemical, construction, civil and other fields, suitable for the transportation of pressurized or corrosive gases and liquids.
It has been widely used in the watering of gardens and lawns. Next, let's take a look at the pressure problem of PVC fiber reinforced hose.
1. It is recommended to use PVC fiber reinforced hose within the appropriate temperature and the indicated range.
2. The PVC fiber reinforced hose expands and contracts with the influence of its internal pressure and temperature. Please cut the hose to the required length during the trial period.
3. When applying pressure, please open the valve slowly to avoid damage to the PVC fiber reinforced hose due to impact.
4. When using negative pressure, the hose should be selected reasonably according to the different changes of its use and conditions.
PVC fiber reinforced hose is a kind of pipe with anti-aging advantages, among which latex elastic pipe and sanitary pipe, PVC fiber reinforced hose, etc. can be well satisfied.
Because it is produced with high-quality fiber material, and this fiber material will be further processed in use, and even used in the production of cosmetics is similar, making it more widely used.
PVC is also the main material, and the molding materials of PVC fiber reinforced hoses and general PVC hoses are basically the same. Then add a certain proportion of plasticizers, stabilizers, lubricants and other auxiliary materials to form the formula after extrusion.
The difference between the PVC fiber reinforced hose and the ordinary PVC hose is that during the extrusion molding process, the inside of the pipe wall is sandwiched by a layer of chemical fibers.
Polyvinyl chloride steel pipe is mainly formed by the combination of various raw materials of polyvinyl chloride, and it is a lattice chemical fiber.
The function of PVC fiber reinforced hose is not only the corrosion function of the original plastic pipe, but also the tortuous function of the PVC gas hose, which must also withstand the pressure at work.
