Manufacturers of high pressure rubber tubing remind everyone that in the process of loading and unloading high pressure rubber tubing, in order to ensure the quality of high pressure rubber tubing and avoid damage during transportation, manufacturers of high pressure rubber tubing should pay attention to the following points.
(1) During the loading and unloading process of the high pressure rubber tubing, it should be lightly loaded and unloaded.
(2) The pipe needs to be sorted and rolled neatly for shipment. Avoid excessive bending of the pipe body, and do not pile other heavy objects on the pipe.
(3) The high pressure rubber tubing manufacturers are strictly prohibited from mixing the pipe with acids, alkalis, oils, organic solvents, and flammable and explosive materials; the pipe body should not be in direct contact with goods with sharp edges.
(4) For high pressure rubber tubing that need to be transported straight, high pressure rubber tubing manufacturers should note that when the length of the high pressure rubber tubing exceeds the loading compartment, the extra-long part should be supported by a bracket to prevent the pipe from being dragged and damaged on the ground.
If the pipe needs to be temporarily stacked in the open air for some reason, the site must be leveled. The pipe should be neatly laid down, and covered under the cover without being pressed by heavy objects; at the same time, the pipe should not be in contact with the heat source.
(5) When handling high pressure rubber tubing, they should not be dragged anywhere. For heavy pipes, lifting equipment or special equipment should be used for loading and unloading, and the pipes should be protected from accidental damage.
High pressure rubber tubing is used in mine hydraulic supports, oilfield development, engineering construction, lifting and transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools. Besides, it is applied as pipelines for conveying petroleum-based and water-based liquids, etc., with a certain temperature and pressure in the mechanized and automatic hydraulic system in various industrial sectors and for liquid transmission.
For the use characteristics of the high pressure rubber tubing, determine the large working pressure of the high pressure rubber tubing according to the pressure of the system. Each high pressure rubber tubing has a normal working pressure, and the burst pressure of the high pressure rubber tubing is 3 to 4 times the large working pressure.
The higher the pressure, the more the number of layers of steel wire and the more rigorous the production of the product. Therefore, according to the actual pressure of the system, select the high working pressure of the high pressure rubber tubing, which can ensure the normal operation of the system and select the appropriate high pressure rubber tubing for use.
If the impact pressure of the system is frequent, the high pressure rubber tubing with a longer pulse life should be selected, and the specifications and model classification of the high pressure rubber tubing should be appropriately increased.
Temperature is also one of the customers' considerations. Excessively high or low ambient temperature of the high pressure rubber tubing will affect the service life and pressure-bearing capacity of the rubber pipe. Therefore, the high pressure rubber tubing should be used within its allowable range. For systems within the allowable range, pipe sheaths or special rubber tubes should be purchased.
